|
|
|
Wrapped V-Belts |
|
Classical V-Belts |
Applications: |
|
|
Suitable for all industrial applications. |
Features: |
|
● |
Heat resistance. |
● |
Oil resistance. |
● |
Less stretch. |
|
Type: Y, K, M(Z), A, B, C, D, E |
|
|
|
|
|
|
Narrow V-Belts |
Applications: |
|
|
Suitable for all industrial applications, particularly where space, weight and horsepower capacity are critical. |
Features: |
|
● |
High horsepower rating
Requires about 1/3 of the space needed
by Classical V-Belts. |
● |
Long life. |
● |
Heat and oil resistant. |
● |
Less stretch. |
|
Type: SPZ, SPA, SPB, SPC, 3V, 5V, 8V |
|
|
|
|
|
|
|
|
Raw-Edge V-Belts |
|
Applications: Cars, agricultural machinery, blowers, dynamos, escalators. |
|
|
|
Rawedge Cogged V-Belts |
Features: |
|
|
● |
For smaller pulley and high-horsepower applications, especially for buses and trucks. |
● |
Long life. |
● |
Heat and oil resistant. |
● |
Less stretch. |
|
Type: FM, AX, ABX, BX, CX |
|
|
|
|
|
|
Rawedge V-Belts |
Features: |
|
|
● |
Less stretch. |
● |
Considerably longer belt life compared to Classical V-Belts. |
|
Type: AV10, AV13, AV15, AV17, AV22 |
|
|
|
|
|
|
Rawedge Multi-Ply V-Belts |
Features: |
|
|
In addition to the features of Rawedge V-Belt, Rawedge Multi-Ply V-Belts provide more flex-life and noiseless drives. |
|
|
Type: AV10, AV13, AV15, AV17, AV22 |
|
|
|
|
|
|
Rawedge Narrow V-Belts |
Applications: |
|
|
Suitable for all industrial applications,
particularly where space, weight and horsepower capacity are critical. |
Features: |
|
● |
High horsepower rating
Requires about 1/3 of the space needed
by Classical V-Belts. |
● |
Long life. |
● |
Heat and oil resistant. |
● |
Less stretch. |
|
Type: 3VR, 5VR |
|
|
|
|
|
|
Narrow Cogged V-Belts |
Applications: |
|
|
Suitable for all industrial applications,
particularly where space, weight and horsepower capacity are critical. |
Features: |
|
● |
High horsepower rating
Requires about 1/3 of the space needed
by Classical V-Belts. |
● |
Long life. |
● |
Heat and oil resistant. |
● |
Less stretch. |
|
Type: XPZ, XPA, XPB, XPC, 3VX, 5VX |
|
|
|
|
|
|
|
|
Banded V-Belts |
|
Features: |
● |
Permanent matched set. |
● |
No lateral whip, spin or jump-off. |
● |
Deep pulley grooves are not required
even on horizontal drives. |
● |
Heat and oil resistant. |
|
|
|
|
|
Banded V-Belts |
Type: A, B, C, D |
|
|
3V, 5V, 8V |
|
|
|
|
|
|
|
|
|
|
|
|
Banded Cogged V-Belts |
Type: AX, BX, CX |
|
|
3VX, 5VX |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Variable Speed Belts |
|
|
Applications: |
|
|
Gear changers, motorcycles and agricultural machinery. |
Features: |
|
● |
Flexibility.
Cog pattern gives flexibility resulting in efficient heat dissipation. |
● |
High power transmission capacity.
Strong tensile members and transverse modules provide high horse power rating. |
● |
High heat and oil resistance. |
● |
Wide range of speed ratios. |
|
|
|
|
|
|
|
Double V-Belts |
|
|
Features: |
|
Double V-Belts can drive pulleys by both side of the belt. They are used on equipment for which a number of shafts have to be driven at the same time. |
Type: AA, BB, CC |
|
|
|
|
|
|
|
|
V Ribbed Belts |
|
|
Features: |
|
|
● |
High horsepower rating.
V Ribbed Belts have a 30-50% horsepower rating higher than Classical V-Belts. |
● |
Spacing saving.
Pulleys with outside diameters as small as 0.8 inch can be used. |
● |
Low vibration. |
● |
Oil and heat resistant, less stretch, long life. |
|
Type: PH, PJ, PK, PL, PM |
|
|
|
|
|
|
|
|
Timing Belts |
|
Applications: |
Suitable for auto mobiles, machine tools, chemical engineering, light industry, mining, instruments, oil industry and so on as well as all kinds of other machinery drive. |
Features: |
Synchronous belt drive has such features as exact transmission ratio, nonsliding constant velocity ratio which can be gained, even mition, absorption of vibration, little noise, the big range of transmission ratio which can normally reach 0.98, compacting structure, the suitability to multi-axis transmisson, no deed of lubrication, no pollution and so on. |
|
|
Trapezoid Tooth
Timing Belt |
|
|
Type: MXL, XL, L, H, XH, XXH |
|
T2.5, T5, T10, T20 |
|
AT5, AT10, AT20 |
|
|
|
|
|
Round Tooth Timing Belt |
Type: HTD |
|
|
2M, 3M, 5M, 8M, 14M, 20M |
|
STPD/STS |
|
S2M, S3M, S4.5M, S5M, S8M, S14M |
|
RPP/HPPD |
|
2M, 3M, 5M, 8M, 14M |
|
|
|
|
|
Double sided Timing Belt |
|
|
Trapezoid Tooth |
Type: DXL, DL, DH, DT5, DT10 |
|
|
|
|
Round Tooth |
Type: DS3M, DS5M, DS8M, DS14M |
|
|
|
|
|
|
|
|
Rubber Flat Cord Belt |
|
|
Features: ROLL offers endless SuperFlex Belt, made with a single layer tensile member with high tensile cords. |
|
● |
High Speed Drives up to 60m/s.
Thin belt dimension resulted in reducing the effect of centrifugal strength force and applying smaller pulleys.
|
● |
Less stretch. |
● |
Static conducting, oil and heat resistance. |
|
|
|
|
|
|
|
Light Duty(Electronic Products, Textile Machinery etc.) |
|
|
Medium Duty(Blower, Pump, Machine Tool etc) |
|
|
Heavy Duty(Compressors, Presses) |
|
|
|